BPI low pressure inflator for TDS brand diving wings and jackets and wings, compatible with most tracheas on the market. Metal inflation and drain buttons.

Carrying case with everything you need to service TDS & similars  BPI - low pressure inflators. Includes: Pliers with rounded tips. Cone for inflator button gasket Bush wrench Silicone lubricant 5 mm hexagon socket Set of O-rings in different sizes Plastic flanges.

Replacement bladder for the TDS Iron 20 technical diving wing. Circular design in heat-sealed cordura. Base for welded valves and trachea.

Silicone flat gasket for upper trachea elbow on TDS scuba diving bcs.

The X-Tolok sidemount sidemount side diving system from the TDS Cave series, has been developed entirely by the instructors at Cuevas in Playa del Carmen, the cradle of cave diving worldwide, with thousands of hours and miles of exploration in Cenotes. Incorporates an innovative three-dimensional air bladder system in the shape of a turtle shell, which strategically distributes the air across the back, providing an impeccable trim, in addition to providing unparalleled comfort for long duration dives

The X-Balam sidemount sidemount side diving system from the Kave series of TDS, has been developed entirely by the instructors of Cuevas in Playa del Carmen, the cradle of cave diving worldwide, with thousands of hours and kilometers of exploration in Cenotes. The X-Balam is a system very directed to caving-diving due to its great versatility. The X-Balam has been designed as a minimalist and versatile system: includes a whole series of hardware to be able to configure the harness and poles in different ways. This hardware is delivered disassembled so that the diver can configure it according to his needs, preferences and adapting the lengths of the bungees (see detail image).

Complete TDS backmount technical diving system Arrow 32 Travel single tank. Complete and ready to dive, simply needs to be adjusted to the diver's measurements. The Arrow system in travel version includes an ultra light and comfortable soft backpack ideal for travel or easy transport. The padded back pad allows the weight to be evenly distributed for maximum comfort.

TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.

High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.

The TDS Tolok pocket, is a specially pocket designed for technical diving, being valid for both backmount and sidemount systems thanks to the versatility of its design. A pocket designed down to the smallest detail to offer maximum performance to the technical diver.

Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.

TDS DIR Harness Scuba Diving Harnais: Technical harness for mounting on back plate (not included), with all necessary components included for a basic DIR configuration. The set is sold disassembled for the diver to assemble on his plate with his personal settings and preferences.