Hybrid BC that combines the lightness and simplicity of recreational jacket with the versatility of technical diving systems. In fact you may mount any pocket depending on usage needs.

The Modular Adavnce is the evolution of the Modular series, hybrid BC between sport and technical diving, with wing format and built-in harness, which make it very comfortable by having all the air volume in the back. Very light, about 2.7 kg approximately, which makes them ideal for travel, but at the same time resistant to be a jacket for regular local dives. 

TDS Nemo QRS BCd Scuba Diving Bouyancy Compensator: The TDS Nemo hydrostatic diving BCD, is a Jacket of the sport range, of great lightness and simplicity, but with high-end finishes and features.

TDS Titan QRS BCd Scuba Diving Bouyancy Compensator: The TDS Titan Hydrostatic BCD is a top of the range sport jacket, with independent harness and semi-wing system that distributes air around the body. Thanks to this distribution, a much better trimming is achieved underwater, and comfort, especially on the surface, increases considerably as the air cushion around the body is much less noticeable.

The TDS Tolok pocket, is a specially pocket designed for technical diving, being valid for both backmount and sidemount systems thanks to the versatility of its design. A pocket designed down to the smallest detail to offer maximum performance to the technical diver.

The TDS Xtrem TK3 is a pocket specially designed for technical diving, being valid for both backmount and sidemount systems, due to the versatility of his design. The pocket is designed with the smallest detail to offer maximum benefits to the technical diver.

Heavy duty cordura accessory holder pocket for harness or jacket, perfect for carrying small accessories and even a spare mask . Ideal to place on harness webbing, jacket and even on belts with webbing up to 50 mm.

High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.

Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.

D ring 50 mm long stainless steel. Essential for the assembly of harnesses in technical diving.

D-ring with removable straight parts, it lets you put in areas where the harness strap has a return that is already sewn, without disassembling the harness.