OXYGEN METALIC DECANTING HOSE
Metalic decanting device specially designed for oxygen. Purge tap. DIN 200/300 connections at both ends. Hose length 2,10 m approx.
There are 12 products.
Metalic decanting device specially designed for oxygen. Purge tap. DIN 200/300 connections at both ends. Hose length 2,10 m approx.
Twins valve for 18 liters long cylinders (216 mm diameter). With metric thread M 25x2 EN144. Manifold connection without isolating valve
Twins valve for S80 aluminium cylinders (180 mm diameter). With metric thread M 25x2 EN144. Manifold connection without isolating valve
Metalic decanting device for oxygen. Purge tap. With pressure gauge to control the amount of transferred gas. DIN 200/300 connections at both ends. Hose length 2 m approx.
Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve.
TDS stages GULL sold separately for experienced divers can mount the necessary settings for your type of diving. But it is essential that they are well trained to use it, because otherwise you may incur a hazard
TDS stages sold separately for experienced divers can mount the necessary settings for your type of diving. But it is essential that they are well trained to use it, because otherwise you may incur a hazard
TDS stages GULL sold separately for experienced divers can mount the necessary settings for your type of diving. But it is essential that they are well trained to use it, because otherwise you may incur a hazard
TDS stages sold separately for experienced divers can mount the necessary settings for your type of diving. But it is essential that they are well trained to use it, because otherwise you may incur a hazard
TDS Proteus First Stage for Scuba Diving Regulator: The first stage has 4 LP low pressure outlets and two HP high pressure outlets arranged symmetrically, which allows the hoses to be routed optimally in almost any configuration, and it is possible to mount them left-right on a twin tank.
TDS Proteus First Stage for Scuba Diving Regulator: The first stage has 4 LP low pressure outlets and two HP high pressure outlets arranged symmetrically, which allows the hoses to be routed optimally in almost any configuration, and it is possible to mount them left-right on a twin tank.
TDS Ocean PS First Stage DIN for Scuba Diving Regulator: The TDS Oceanus PS first stage has 4 low pressure LP ports and one high pressure HP port, which allows a standard configuration with an additional low pressure outlet to connect a dry suit inflation hose.