Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold.

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

TDS Strong Black Scuba Diving Pressure Gauge: Pressure Gauge for scuba diving up to 400 bar, with steel housing and protective rubber boot. Very resistant socket with rubber rings on either side.

TDS Strong Black Scuba Diving Control Console: Diving control console with analog instruments, pressure gauge with scale up to 400 bar and analog depth gauge with range up to 70 m.

Twins valve for S80 aluminium cylinders (180 mm diameter). With metric thread M 25x2 EN144. Manifold connection without isolating valve

Modular side Right-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.

Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug.

The TDS 63 mm diving pressure gauge has the main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and has up ti 400 bar range.

Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.

Pressure gauge up to 400 bar, with steel case and rubber sheath in green for nitrox-oxygen.

Without isolation valve manifold for mounting twins. Different measures depending on thecylinders of the set: 171 mm for 10/12 liters long twins, 203 mm for 12/15 liters twins